NetComm Wireless NF8AC User Guide
TR-069 Client
TR-069 enables provisioning, auto-configuration or diagnostics to be automatically performed on your router if supported by your
Internet Service Provider (ISP).
Set to enable to activate TR-069 client settings.
Time in seconds that data is sent to the Auto-Configuration Server (ACS).
The address where the ACS server is located.
The user name to access the ACS server.
The password to access the ACS server.
WAN Interface used by TR-069
Client
The connection used to send and receive data to the ACS server.
Internet Time
The Internet Time page allows you to configure NTP time servers that the NF8AC router synchronises with in order to keep accurate
time.