3
CONNECTING TO THE WI-FI 6 HYBRID GATEWAY
There are three ways that you can connect to Wi-Fi.
1. Using your smartphone or tablet camera, scan the QR code on the
gateway’s label or Wi-Fi Security Card (example on page 4).
Select “Join Wi-Fi Network” if prompted.
2. Hold down the WPS button on the Wi-Fi 6 Hybrid Gateway, then
select the Network Name from the list on your device or push the
WPS button on your device to connect password-free.
3. Perform a manual network scan from your device and select the
gateway’s network name, then enter the Wi-Fi Password. This
information can be found on the Wi-Fi 6 Hybrid Gateway’s label
(example on page 4) and on the included Wi-Fi Security Card.
To Next Page
Loading...
Need help?
General
