Security Gateway Manual Netgate-6100
SFP+ Ethernet Ports
WAN3 and WAN4 are discrete ports, each with dedicated 10 Gbps back to the Intel SoC.
Warning: There is an Intel-supplied driver issue for the C3000, preventing 1Gbps and 10Gbps copper modules
from being recognized on the SFP+ ports. Copper modules are not supported.
Compatible SFP/SFP+ Modules
Below are some general guidelines for compatible SFP/SFP+ modules:
• Intel-branded SFP+ SR/LR Dual Speed (1G/10G) optical modules.
• Intel-branded SFP+ DA twin-ax cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.
Note: Limited to 10G link speed (no 1G support).
• Third party SFP+ DA twin-ax cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Note:
Limited to 10G link speed (no 1G support).
• SFP+ AoCs (Active optical Cables). Note: Limited to 10G link speed (no 1G support).
• Third party SFP+ SR/LR dual speed 1G/10G) optical modules
• SFP+ active copper cables
• 1000BASE-SX / 1000BASE-LX optical modules
Specific known-working modules include:
Model / Part Number Description
Finisar FTLF1318P3BTL
1000BASE-LX and 1G Fibre Channel (1GFC) 10km
Industrial Temperature Gen 3 SFP Optical Transceiver
Finisar FTLX1471D3BCL
10Gb/s 10km Single Mode Datacom SFP+ Transceiver
Intel FTLX8571D3BCV-IT
1G/10G Dual Rate SFP Fiber Optical Transceiver
Module
Finisar FTLX8574D3BCL
10GBASE-SR/SW 400m Multimode Datacom SFP+
Optical
Transceiver
Finisar FTLF8519P3BNL
1000BASE-SX and 2G Fibre Channel (2GFC) 500m
Extended Temperature SFP Optical Transceiver
Note: Links at 1G, 2G is not supported
© Copyright 2022 Rubicon Communications LLC 12
To Next Page
Loading...
