Security Gateway Manual SG-3100
Note: When connecting to the GUI, do NOT connect to any port being configured during this procedure or the device
will lose connectivity to the GUI.
1. Open the pfSense
®
Plus software GUI and log in.
2. From the menu, navigate to Interfaces > Assignments.
3. Go to the VLANs tab.
4. In the lower right-hand corner of the screen, click + Add.
5. Choose mvneta1 (MAC Address) - lan from the Parent Interface drop-down menu.
6. Set the VLAN Tag to 4084. Type Lan port 4 as the Description. Click Save.
© Copyright 2022 Rubicon Communications LLC 41
To Next Page
Loading...
