Security Gateway Manual SG-3100
Source OPTx Net (or the custom name)
Destination This Firewall (self)
Description Allow client ICMP to the firewall
• Click Save
Add rule to reject any other traffic to firewall
• Click to add a new rule at the bottom of the list.
• Configure the rule as follows:
Action Reject
Interface OPTx (or the custom name)
Protocol Any
Source Any
Destination This Firewall (self)
Description Reject all other traffic to the firewall
• Click Save
Add rule to reject traffic from this network to private networks
• Click to add a new rule at the bottom of the list.
• Configure the rule as follows:
Action Reject
Interface OPTx (or the custom name)
Protocol Any
Source Any
Destination Single Host or Alias, PrivateNets (the alias created earlier)
Description Reject all other traffic to private networks
• Click Save
Add rule to pass from this interface network to any destination:
• Click to add a new rule at the bottom of the list.
• Configure the rule as follows:
Action Pass
Interface OPTx (or the custom name)
Protocol Any
Source OPTx Net (or the custom name)
Destination Any
Description Default allow all from OTPx
• Click Save
© Copyright 2022 Rubicon Communications LLC 58
To Next Page
Loading...
