Netgate XG-7100-1U User Manual

Security Gateway Manual XG-7100-1U
A static IP address of 192.168.1.1 and a subnet mask (CIDR) of 24 was chosen for this installation. If there are
no plans to connect this network to any other network via VPN, the 192.168.1.x default is sufficient.
Click Next to continue.
Note: If a Virtual Private Network (VPN) is configured to remote locations, choose a private IP address range more
obscure than the very common 192.168.1.0/24. IP addresses within the 172.16.0.0/12 RFC1918 private
address block are the least frequently used. We recommend selecting a block of addresses between 172.16.x.x
and 172.31.x.x for least likelihood of having VPN connectivity difficulties. An example of a conflict would be If
the local LAN is set to 192.168.1.x and a remote user is connected to a wireless hotspot using 192.168.1.x
(very common), the remote client won’t be able to communicate across the VPN to the local network.
1.1.18 Change Administrator Password
Select a new Administrator Password and enter it twice, then click Next to continue.
1.1.19 Save Changes
Click Reload to save configuration.
© Copyright 2020 Rubicon Communications LLC 9

Netgate XG-7100-1U Specifications

General

Brand	Netgate
Model	XG-7100-1U
Category	Gateway
Language	English