NETGEAR AC1450

11
 On Mac systems, do this:
1. Select Go > Connect to Server.
2. Enter smb://readyshare as the server address.
3. Click Connect.
ReadySHARE Printer
 To use ReadySHARE Printer:
1. Connect the USB printer to the router USB port with a USB
printer cable.
2. Install the printer driver software (available from the printer
manufacturer) onto each computer that will share the printer.
3. Visit www.netgear.com/readyshare and download and install the
NETGEAR USB Control Center utility onto each computer that will
share the printer.
4. For ReadySHARE Printer setup, follow the Easy to Set-up
Instructions that are available online just above the download links.