NETGEAR AC1450 Installation Guide

2
Install Your Router
Make sure that your Internet service is active before you install the
router.
 To install your router:
1. Prepare your modem.
a. Unplug your modem’s
power.
b. If the modem has a battery
backup, remove its
batteries.
c. If your modem was already
connected to another
router, disconnect the cable
between your modem and
that router.
Now your modem should be
completely turned off, and
cabled only to the wall jack for your Internet service.
Internet
DSL or cable
Modem

NETGEAR AC1450 Specifications

General

Brand	NETGEAR
Model	AC1450
Category	Network Router
Language	English