NETGEAR AC785-100EUS - Add a WiFi Device to Your WiFi Network

Use Your Hotspot
25
AirCard 785 Mobile Hotspot
Add a WiFi Device to Your WiFi Network
You can connect up to 15 WiFi devices (such as smartphones, laptops, tablets, digital
cameras, printers, gaming consoles, and digital picture frames) to your hotspot network. For
information about setting connections for main WiFi and guest WiFi networks, see Set the
Maximum Number of Connected Devices on page 27.
You can add a WiFi device to your WiFi network manually. If the device you are adding is
WPS enabled, you can use the WPS method to connect the device without using the WiFi
password.
Add a WiFi Device Manually
 To add a WiFi device manually:
1. On the WiFi device that you want to add to your network, view the list of available WiFi
networks.
2. Connect to the network that corresponds to your hotspot network as displayed on the LCD
screen.
3. When prompted, enter the WiFi password for your hotspot network.
The WiFi password displays on the hotspot LCD screen. If the screen is turned off, press
and quickly release the Power button to wake the LCD screen.
Add a WPS-Enabled Device
You can add a WPS-enabled WiFi device to your WiFi network without a WiFi password,
using the hotspot web page or the LCD screen.
 To add a WPS-enabled WiFi device from the LCD screen:
1. Press the Power button to wake the LCD screen.
2. On the hotspot, press the Navigation button until the Wi-Fi Protected Setup screen
displays.
3. Press the Power button.