6.
Click the button for the WPS method that you want to use:
•
WPS button pairing. If the device that you want to connect includes a WPS key,
click the WPS button pairing button and, within two minutes (120 seconds),
press the device’s WPS key.
•
Enter WPS PIN. If a WPS pin is associated with the device that you want to
connect, click the Enter WPS PIN button and enter the device’s WPS PIN.
Your mobile hotspot and the Wi-Fi device communicate and establish the connection.
Manage Wi-Fi
Advanced users can set up the Wi-Fi radio of the mobile hotspot to meet their Wi-Fi
needs by customizing settings on the mobile hotspot web page.
On the mobile hotspot web page, the following Wi-Fi profiles are available:
•
Default, main Wi-Fi. Share your main Wi-Fi with 2.4 GHz devices that you trust.
•
5 GHz Wi-Fi. Share your main Wi-Fi with 5 GHz devices that you trust.
•
Dual-band Wi-Fi. Share your Wi-Fi with 2.4 GHz and 5 GHz devices.
By default, main Wi-Fi is enabled and both dual-band Wi-Fi and guest Wi-Fi are disabled.
If your place of business does not allow Wi-Fi or for any other reason you want to disable
Wi-Fi and use the mobile hotspot only in tethered mode, the mobile hotspot gives you
that option.
Note: Whenever you change Wi-Fi settings, any devices connected to the mobile
hotspot are disconnected and might need to be reconnected.
Turn On 5 GHz Wi-Fi From the Mobile Hotspot Web Page
When all of your devices support 5 GHz Wi-Fi, use 5 GHz Wi-Fi for faster downloads.
To turn on 5 GHz Wi-Fi from the mobile hotspot web page:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2.
Enter http://attwifmanager/ .
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
User Manual26Use Your Mobile Hotspot
AirCard 797 Mobile Hotspot
To Next Page
Loading...
