Extend Battery Life
The mobile hotspot, by default, is configured to optimize battery life. The following
factors affect battery life:
•
Screen brightness.
•
Standby time.
•
Data throughput.
•
Mobile broadband signal strength (the better the signal, the longer the battery life).
•
Wi-Fi range.
•
Dual-band Wi-Fi (when all of your devices support 5 GHz Wi-Fi, dual-band Wi-Fi
allows faster downloads but uses more power).
•
Guest Wi-Fi, when enabled, uses more power.
To extend the battery life, use any of the following methods:
•
Adjust Wi-Fi settings.
•
Adjust display settings.
•
Use tethered USB.
Adjust Wi-Fi Settings to Optimize Battery Life
If the devices that you are connecting to your Wi-Fi network are always close to your
mobile hotspot, shorten the Wi-Fi range. Set the standby timer to a shorter period to
minimize the wait time when no devices are connected to either Wi-Fi network before
going into standby mode (the Wi-Fi radios turn off).
Note: When you change the Wi-Fi settings, any devices connected to the mobile hotspot
are disconnected and might need to be reconnected.
You can set the following Wi-Fi options to optimize battery life:
•
Adjust the display settings. See Adjust Display Settings to Increase Battery Life on
page 55.
•
Set the Wi-Fi range to Standard, not Extended, and set the Wi-Fi standby to 5 minutes.
User Manual54Maintain Your Mobile Hotspot
AirCard 797 Mobile Hotspot
To Next Page
Loading...
