34
Modes, Rules, and Smart Alerts
6. Tap the Address field, type the address for your location. and then tap Next.
The geofence radius displays as Medium.
7. (Optional) To change your radius setting, tap the radius icon, select a radius
size, and tap Next.
Radius size options are Small, Medium, or Large (approximately 150 meters,
250 meters and 500 meters, respectively)..
8. Enter a name for your location and tap Next.
The Away Mode page displays a list of available modes. The away mode is the
detection mode used by the camera when you are away from the location that
you specified.
9. Select an Away mode and tap Next.
Note: When your mobile device is Out of Zone, the Arlo device defaults to the Away
Mode. Most people select Armed or Custom Mode while they are away.
10. Select a Home mode and tap Next.
Note: When your mobile device is In Zone the Arlo device defeaults to Home mode
Most people select Disarmed or Custom Mode while they are home.
If you have more than one enabled mobile device, you might be asked to select
an Arlo device to connect it to.
11. (Optional) Tap the preferred mobile device and tap Next.
12. Tap Save.
Geofencing With Multipe Mobile Devices
If you want multiple mobile devices to participate in your Arlo geofencing, ensure
that the required conditions are met, then follow the steps to enable or disable
geofencing for the devices.
Ensure that these conditions are met:
• Your Arlo devices are online.
• Your geofencing feature is enabled.
• Your friend’s mobile device is added to your account.
For more information about adding devices, see Enable or Disable Geofencing
for Friends’ Mobile Devices on page 35.
To Next Page
Loading...
