Back View
Click to enlarge.
The Netgear C7000v2 has the following ports available on the back of the modem.
Power – Connect the supplied power cord to this port.
Ethernet – Provides internet access to a single device. Only one port is active at a
time.
Note: This port is a LAN Gigabit Ethernet port.
Reset – Use this button in the unlikely event that you want to restore the default
factory settings. This button is recessed to prevent accidental resets of your modem.
Cable / coaxial – Connect your coaxial cable line to this port.
USB – Connect to selected client devices.
MAC Address
Click to enlarge.
MAC addresses are written as 12 digits containing both letters and numbers (0-9, A-F). A
MAC address is unique. The first six characters of the MAC address are unique to the
manufacturer of the device.
The S/N is the serial number.
The CM MAC is the MAC address.
Troubleshooting
The lights indicate the current status of your gateway. To troubleshoot any connection problems, use the table below.
To Next Page
Loading...
