Modem
Light
Status Problem
Power Off No power.
Green None
Red The cable modem is too warm and might overheat.
Downstream
Off Downstream channel is inactive.
Blinking
Green
Scanning for downstream channel
Solid Amber None – connection established on one channel
Solid Green
None – operating on more than one channel
Upstream
Off Upstream channel is inactive.
Blinking
Green
Scanning for upstream channel
Solid Amber None – connection established on one channel
Solid Green None – operating on more than one channel
Internet Off Modem is offline.
Blinking
Green
None – scanning for configuration parameters
Solid Green None – operational
2.4 GHz Off 2.4 GHz radio off.
Solid Green None – 2.4 GHz radio on
5 GHz Off 5 GHz radio off
Solid Green None – 5 GHz radio on
Ethernet Off A device is not connected to the Ethernet port on the back.
Solid Green None – A device is connected to the Ethernet port.
WiFi On/Off Off WiFi is disabled.
On None – WiFi is enabled.
WPS
Blinking
Green
None – This button lets you use WPS to join the WiFi network without typing the WiFi
password.
The WPS LED blinks during this process and then lights solid.
Manufacturer Resources
For more detailed technical information, use the resources below.
Data Sheet (PDF)
Quick Start (PDF)
User Manual (PDF)
Related Manuals
To Next Page
Loading...
