8
Join the WiFi Network
You can either use Wi-Fi Protected Setup (WPS) or select your WiFi
network and type its password. For help with the WPS button on
your WPS-enabled device, check the instructions or online help that
came with that computer or device. Some older equipment cannot
use WPS.
Join the WiFi Network Using WPS
For help with the WPS button on your WPS-enabled device, check
the instructions or online help that came with that device. Some
older equipment cannot use WPS.
¾ To join the network using WPS:
1. Press the WPS button
on the modem router for three to
five seconds.
The WPS LED on the modem router blinks green.
2. Within two minutes, on your WPS-enabled device, press its
WPS button or click its onscreen WPS button.
The WPS LED on the modem router lights solid green when the
WPS-enabled device connects to your modem router.
3. Repeat this process to add other WPS-enabled devices.
To Next Page
Loading...
Need help?
General
