Share USB Devices Attached to the Modem Router
39
AC3200 WiFi Cable Modem Router
2. If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the modem
router.
When you connect the USB storage device to the modem router USB port, it might take
up to two minutes before it is ready for sharing. By default, the USB storage device is
available to all computers on your local area network (LAN).
Access a USB Drive Connected to the Modem Router From
a Windows-Based Computer
To access a USB storage device from a Windows-based computer:
1. Connect a USB storage device to a USB port on your router.
2. If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the modem
router.
When you connect the USB storage device to the modem router’s port, it might take up to
two minutes before it is ready for sharing. By default, the USB storage device is available
to all computers on your local area network (LAN).
3. Select Start > Run.
4. Enter \\readyshare in the dialog box.
5. Click the OK button.
A window automatically opens and displays the files and folders on the USB storage
device.
Map a USB Device to a Windows Network Drive
To map a USB device to a Windows network drive:
1. Connect a USB storage device to a USB port on the router.
2. If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the modem
router.
When you connect the USB storage device to the router’s port, it might take up to two
minutes before it is ready for sharing. By default, the device is available to all computers
on your local area network (LAN).
3. Select Start > Run.
4. Enter \\readyshare in the dialog box.
5. Click the OK button.
To Next Page
Loading...
Need help?
General
