Manually Set Up the Internet Connection
In most situations, you do not need to change these settings. We recommend that you
use the default settings for DHCP because most cable Internet services provide the IP
address through DHCP.
To specify the Internet connection settings:
1.
Launch a web browser from a computer or mobile device that is connected to the
modem router network.
2.
Enter http://routerlogin.net or 192.168.1.1.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > Internet.
5.
If your Internet connection requires an account name or host name, type it in the
Account Name (If Required) field.
6.
If your Internet connection requires a domain name, type it in the Domain Name (If
Required) field.
For the other sections in this page, the default settings usually work, but you can
change them.
7. Select an Internet IP Address radio button:
•
Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your
ISP automatically assigns these addresses.
User Manual21Specify Your Internet Settings
Nighthawk AX6 AX2700 WiFI Cable Modem Router Model CAX30
To Next Page
Loading...
Need help?
General
