2.6 If you wish you to configure a wireless network,
click Wireless Settings in the Setup tab.
SSID – This is your wireless network name, enter
anything you like.
Region – Australia
Channel – auto
Mode – b and g
2.7 Security should be enabled on your network.
WPA2-PSK is the security type that should be used.
The passphrase is your wireless network password,
which should consist of minimum of 8 characters
(letters or numbers). Once all the settings have been
entered click Apply (you will be disconnected from
your wireless network, and will have to re-connect).
To Previous Page
Loading...
