NETGEAR DG834G Setup Guide

Netgear DG834G 54 Mbps Wireless ADSL Firewall Router Set-up Guide
_________________________________________________________________________________________________
________________________________________________________________________
i
Netgear DG834G 54 Mbps Wireless ADSL Firewall Router
Set-up Guide for Windows and
Apple Macintosh Operating Systems
The set-up procedure consists of three main parts:
• Connecting the hardware to your Bulldog Broadband line
• Configuring your computer’s network card
• Configuring the Netgear DG834G via its built-in web interface
Package Check
Check your Netgear package. It should contain the following:
• DG834G 54 Mbps Wireless ADSL Firewall Router
• AC power adapter
• Category 5 (Cat 5) Ethernet cable
• Telephone cable
• Microfilter
Ethernet Cabling Requirements
The DG834G Wireless ADSL router connects to your Ethernet LAN via a Category 5
(CAT5) cable such as the one provided.
Computer Hardware Requirements
To use the DG834G Wireless ADSL router on your network, each computer must have
an installed Ethernet adapter and an Ethernet cable, or an 802.11g wireless adapter.
LAN Configuration Requirements
For the initial connection to the internet and configuration of your router, you need to
connect a computer to the router which is set to automatically get its configuration
from the router.

NETGEAR DG834G Specifications

Physical Interfaces

LAN Ports	Four (4) 10/100 Mbps autosensing, Auto Uplink™ RJ45 ports
WAN Port	ADSL RJ11, T1.413, G.DMT, G.Lite, ADSL 2+, ITU Annex A
Wireless	802.11g Access Point auto rate capable up to 54 Mbps

Operating Environment

Operating Temperature	32º to 104º F (0º to 40º C)
Operating Humidity	90% maximum relative humidity, noncondensing
Power Adapter	12 VDC, 1A; plug is localized to country of sale

Weight and Dimensions

Dimensions	6.9 x 1.1 x 4.7 in (175.3 x 27.94 x 119.4mm)
Weight	0.7 lb (0.3 kg)