NETGEAR DG834G - Page 10

Netgear DG834G 54 Mbps Wireless ADSL Firewall Router Set-up Guide
_________________________________________________________________________________________________
________________________________________________________________________
x
MacOS 8.6 or 9.x
1. From the Apple menu, select Control Panels, then TCP/IP.
The TCP/IP Control Panel opens as below:
2. From the “Connect Via” box, select your Macintosh’s Ethernet interface.
3. From the “Configure” box, select Using DHCP Server.
You can leave the DHCP Client ID box empty.
4. Close the TCP/IP Control Panel
5. Repeat this for each Macintosh on your network.
Mac OS X
1. From the Apple menu, choose System Preferences, then Network.
2. If not already selected, select Built-in Ethernet in the Configure list.
3. If not already selected, select Using DHCP in the TCP/IP tab.
4. Click Save.