Wireless-N 300 Modem Router DGN2200 User Manual
Advanced Configuration 6-29
v1.0, March 2010
Table 6-3. Traffic Meter
Setting Description
Internet Traffic
Statistics
Enable Traffic Meter Check this if you wish to record the volume of Internet
traffic passing through the Router's Internet port.
Traffic volume control by Select this if you wish to record and restrict the volume of
Internet traffic passing through the router’s Internet port.
No Limit If this is selected specified restriction will not be applied
when traffic limit is reached.
Download only If this is selected the specified restriction will be applied to
the incoming traffic only
Both Directions If this is selected the specified restriction will be applied to
both incoming and outgoing traffic only
Connection time control Select this if you wish to record and restrict the time
usage of the Internet connection.
Monthly Limit Enter the monthly volume limit or connection time limit.
Round up data volume
for each connection by
Some ISPs charge certain amount of extra data volume
when users make a new connection. If this case, enter
the extra data volume here.
Traffic counter • Restart traffic counter determines when the traffic
counter restarts. Choose the desired time and day of
the month.
• Click Restart Counter Now to restart the Traffic Counter
immediately.
Traffic control alert
issue warning popup Entering a non-zero value to make the routerpop-up a
waring message when the monthly data volume/
connection time limit will be reached after the configured
amount is run out. Only when the Traffic Status windowis
opened, the pop-up message can show up.
block all traffic all access to the Internet will be blocked
Send email
Internet Traffic
Statistics (data
display)
• This displays statistics on Internet traffic via the Internet
port. If you have not enabled the Traffic Meter, these
statistics are not available.
• Click the Traffic Status button if you want live update
about the usage status of theInternet traffic.
To Next Page
Loading...
