Wireless-N 300 Modem Router DGN2200 User Manual
USB Storage 5-7
v1.0, March 2010
You can use this screen to select a folder, to change the Share Name, or to change the Read
Access or Write Access from All-no password to admin. The password for admin is the same
one that is used to log in to the wireless-N modem router main menu. By default it is password.
Configuring USB Storage Advanced Settings
To configure advanced USB settings, under the USB heading on the wireless-N modem router
main menu, select Advanced Settings. The USB Storage (Advanced Settings) screen displays:
You can use this screen to specify access to the USB storage device. The following table explains
the fields and buttons in the USB Storage Advanced Settings screen.
Note: You must click Apply in order for your changes to take effect.
Figure 5-5
To Next Page
Loading...
