Wireless-N 300 Modem Router DGN2200 User Manual
A-4 Wall Mounting and Technical Specifications
v1.0, March 2010
Factory Default Configuration
You can use the Restore Factory Settings button on the bottom panel of your router to restore
factory default settings. Press this button for 6 seconds. Your router will return to the factory
configuration settings shown in the following table.
Regulatory compliance FCC Part 15 Class B; VCCI Class B; EN 55 022 (CISPR 22), Class B
Network protocol and
standards compatibility
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or
Routed Ethernet, and RFC 1577 Classical IP over ATM
Power adapter North America: 120V, 60 Hz, input
Regulatory compliance FCC Part 15 Class B; VCCI Class B; EN 55 022 (CISPR 22), Class B
Interface specifications LAN: 10BASE-T or 100BASE-Tx, RJ-45
WAN: ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
ITU Annex A or B
ITU G.992.5 (ADSL2+)
Table A-2. Factory Default Settings
Feature Default Behavior
Router Login User login URL http://www.routerlogin.com
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default address
WAN MTU size 1492
Port speed Autosensing
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
Table A-1. General Specifications (continued)
Specification Description
To Next Page
Loading...
