Wireless-N 300 Modem Router DGN2200 User Manual
4-6 Managing Your Network
v1.0, March 2010
The Router Status screen provides status and usage information, including the following settings.
Table 4-1. Router Status Fields
Component Field Description
Account Name The host name that is assigned to the wireless-N modem router in the
Basic Settings screen.
Firmware
Version
This field displays the wireless-N modem router firmware version.
ADSL Port MAC Address This field displays the Ethernet MAC address being used by the
Internet (ADSL) port of the wireless-N modem router.
IP Address This field displays the IP address being used by the Internet (ADSL)
port of the wireless-N modem router. If no address is shown, the
wireless-N modem router cannot connect to the Internet.
Network Type The network type depends upon your ISP.
IP Subnet Mask This field displays the IP subnet mask being used by the Internet
(ADSL) port of the wireless-N modem router.
Gateway IP
Address
IP address used as a gateway to the Internet for computers configured
to use DHCP.
Domain Name
Server
This field displays the DNS server IP addresses being used by the
wireless-N modem router. These addresses are usually obtained
dynamically from the ISP.
LAN Port MAC Address This field displays the Ethernet MAC address being used by the local
(LAN) port of the wireless-N modem router.
IP Address This field displays the IP address being used by the local (LAN) port of
the wireless-N modem router. The default is 192.168.0.1.
DHCP If Off, the wireless-N modem router does not assign IP addresses to
PCs on the LAN.
If On, the wireless-N modem router does assign IP addresses to PCs
on the LAN.
IP Subnet Mask This field displays the IP subnet mask being used by the local (LAN)
port of the wireless-N modem router. The default is 255.255.255.0.
To Next Page
Loading...
