Wireless-N 300 Modem Router DGN2200 User Manual
USB Storage 5-5
v1.0, March 2010
You can also type \\readyshare in the address field of your Web browser.
The following table explains the fields and buttons in this screen.
Figure 5-3
Note: If you logged in to the wireless-N modem router before you connected your USB
device, you might not see your USB device in the wireless-N modem router
screens until you log out and then log back in again.
Table 5-1. USB Storage Basic Settings
Fields and Buttons Description
Network Device Name The default is \\readyshare. This is the name used to access
the USB device connected to the wireless-N modem router.
Available Network
folders
Folder Name Full path of the used by the Network Folder.
Volume name Volume name from the storage device (either USB drive or
HDD).
Total/Free Space Shows the current utilization of the storage device.
Share Name • You can click the name shown or you can type it in the
address field of your Web browser.
• If Not Shared is shown then the default share has been
deleted and no other share for the root folder exists. Click
the link to change this setting.
Network/Device Name:
Share Name:
To Next Page
Loading...
