NETGEAR EX6200 Product Manual

10
Connect a Printer
To connect a printer to your extender and enjoy wireless printing
from your laptop and other devices, use your extender’s
ReadySHARE Printer feature.
 To set up your printer:
1. See if your computer already has the printer driver software
installed.
A printer driver is the software that enables your computer to
communicate with your printer.
If your computer has printer driver software installed, go to
Step 2.
If your computer does not have printer driver software already
installed, follow these steps:
a. Locate the printer driver software for your computer.
It usually comes on a CD in the box with your printer. You
can also download the latest software from your printer
manufacturer’s website.
b. Insert the CD or launch the download.
The driver guides you through the installation.

NETGEAR EX6200 Specifications

Ports & interfaces

ethernet ports	Five (5) 10/100/1000 Ethernet ports
usb port	USB 3.0 port
dual band antennas	Two (2) detachable external antennas

Weight and Dimensions

dimensions	9.92 x 6.85 x 1.22 in (252 x 174 x 31 mm)
weight	0.67 lb (302 g)
antenna gain	5 dBi