NETGEAR EX6200 Product Manual

12
If you have problems printing, follow these troubleshooting tips:
• Some firewall software blocks the ReadySHARE Print utility
from accessing the printer. If you do not see the printer listed in
the NETGEAR USB Control Center utility, disable the firewall
temporarily to allow the utility to work.
• The NETGEAR USB Control Center utility must be running in the
background for printer sharing to work. If you exit the utility,
you cannot access the printer on your WiFi network.
• If the printer status is manually connected or otherwise
unavailable, it means the printer is in use. It becomes available
after the current job is finished or the connection times out. The
default time-out is 30 seconds. You can change the default
time-out setting in the NETGEAR USB Control Center by
selecting Tools > Configuration.

NETGEAR EX6200 Specifications

Ports & interfaces

ethernet ports	Five (5) 10/100/1000 Ethernet ports
usb port	USB 3.0 port
dual band antennas	Two (2) detachable external antennas

Weight and Dimensions

dimensions	9.92 x 6.85 x 1.22 in (252 x 174 x 31 mm)
weight	0.67 lb (302 g)
antenna gain	5 dBi