NETGEAR EX6200 Product Manual

15
My router security is WEP, and I entered the wrong
passphrase or security key on the extender. I cannot access
the extender anymore. What can I do?
The extender cannot check to see if the WEP passphrase is correct.
If you entered the wrong passphrase, your wireless device is not
able to get the IP address from the extender. You must reset the
extender to the factory defaults to get the IP address back.
I am connected to NETGEAR_EXT and launched a browser.
Why am I unable to see NETGEAR genie?
Try these troubleshooting steps:
• Make sure that your computer is set up to use DHCP (most
are).
• Make sure that the Client Link LED is green and that you have a
valid IP address.
• Relaunch the web browser and type www.mywifiext.net or
www.mywifiext.com in the address field of the web browser.
Enter admin for the user name and password for the password.

NETGEAR EX6200 Specifications

Ports & interfaces

ethernet ports	Five (5) 10/100/1000 Ethernet ports
usb port	USB 3.0 port
dual band antennas	Two (2) detachable external antennas

Weight and Dimensions

dimensions	9.92 x 6.85 x 1.22 in (252 x 174 x 31 mm)
weight	0.67 lb (302 g)
antenna gain	5 dBi