NETGEAR EX6400v2 Quick Start

12
3. Connect a computer or mobile device to the extender using a
WiFi or Ethernet connection:
• WiFi. On your WiFi-enabled computer or mobile device,
join the extender WiFi network NETGEAR_EXT.
Note: NETGEAR_EXT is the extender’s default WiFi
network.
When your WiFi-enabled computer or mobile device is
connected to the extender, the Client LED lights.
• Ethernet. Use an Ethernet cable to connect the Ethernet
port on the extender to an Ethernet port on your
computer.
Note: You must do this before you connect your extender
to your modem router or router.
4. Launch a web browser and visit www.mywiext.net.
The NETGEAR installation assistant displays.
5. Use an Ethernet cable to connect an Ethernet port on your
router to the extender’s Ethernet port.

NETGEAR EX6400v2 Specifications

General

Brand	NETGEAR
Model	EX6400v2
Category	Extender
Language	English