NETGEAR EX6400v3 User Manual

Log in to the extender after installation
After installation, you can log in to the extender to view or change the extender’s settings.
To log in to the extender:
1.
Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•
If you did not enable the One WiFi Name feature, enter www.mywifiext.net in
the address field of the browser.
•
If you enabled the One WiFi Name feature, enter one of the following URLs:
-
Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-
Mac computers and iOS devices. http://mywifiext.local/
-
Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 63.
Login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
Run the Smart Setup installation
You can use the Smart Setup to change the extender settings. This is an easy way to
connect the extender to a different router or to change the extender WiFi network name
(SSID) or WiFi password.
To run the Smart Setup:
1.
Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•
If you did not enable the One WiFi Name feature, enter www.mywifiext.net in
the address field of the browser.
User Manual19Get started
AC1900 WiFi Mesh Extender Essentials Edition

NETGEAR EX6400v3 Specifications

General

Brand	NETGEAR
Model	EX6400v3
Category	Extender
Language	English