For you to use this feature, the 2.4 GHz and 5 GHz networks must use the same
SSID and password.
Note
7. To disable the Smart Connect feature, select the No radio button.
If you disable this feature, you can set a new SSID and password for the extender’s 2.4 GHz and 5 GHz
networks in the Network Name (SSID) and WiFi Password fields on this page.
8. Click the SAVE button.
Your settings are saved.
View Connected Devices
You can view a list of devices that are connected to the extender network.
To view connected devices:
1. Launch a web browser from a computer or mobile device that is connected to your extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter www.mywifiext.net in the address field of
the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computers. http://mywifiext or http://mywifiext.local
- Mac computers, iOS devices, and Linux devices. http://mywifiext. local
- Android devices. http://<extender’s IP address> (for example, http://192.168.1.3)
For more information about how to find your extender’s IP address, see Find the Extender’s IP
Address on page 49.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Connected Devices.
The Connected Devices page displays. The devices connected to the extender displays on the page.
Extender Network Settings
22
Nighthawk X6 AC2200 Tri-Band WiFi Range Extender
To Next Page
Loading...
Need help?
General
