NETGEAR GC110P User Manual

Installation
Connect the Switch to Your Network
1. Connect devices to the RJ-45 network ports on the switch.
For model GC110P, you can connect either a PoE or non-PoE device to
any port. Model GC110 supports only non-PoE devices.
Use Category 5e (Cat 5e) or higher-rated Ethernet cables terminated
with RJ-45 connectors to make Gigabit connections.
2. Connect an RJ-45 port or SFP port on the switch to your network.
In a small network, connect the switch to the LAN port of a router that,
in turn, is connected to an Internet modem or gateway.
If you use an SFP port, you must insert an SFP transceiver module,
which is available from NETGEAR.
3. Power on the switch and wait for two or three minutes until the Power
LED lights green, indicating that switch completed its startup process
and is available on the network.
4. Make sure that you can reach the switch from your mobile device for
initial configuration:
• Option 1. One of the devices that you connect to a network port
on the switch in Step 1 is a WiFi router or access point, allowing you
to connect to the switch using your mobile device over the access
point’s WiFi network.
• Option 2. The network to which you connect the switch in Step 2
is connected to the Internet, allowing you to connect to the switch
using your mobile device over the cloud.
NETGEAR VIZN 8-Port Gigabit Ethernet App Managed
Smart Cloud Switch with 2 SFP Fiber Ports (GC110)
NETGEAR VIZN 8-Port Gigabit Ethernet PoE App Managed
Smart Cloud Switch with 2 SFP Fiber Ports (GC110P)
Package Contents
Unpack the box and verify the contents:
• Switch model GC110 or GC110P
• Power adapter (localized to the country of sale)
• Wall-mount screw kit for wall installation
• Four rubber footpads for tabletop installation
• Installation guide
Configure the Switch Using the NETGEAR
Insight App
By default, the switch receives an IP address from a DHCP server (or a router
that functions as a DHCP server) in your network. If your network does
not include a DHCP server, the switch uses 192.168.0.239 as its default IP
address. The NETGEAR Insight app lets you discover, configure, manage, and
monitor your switch.
Note: You can also connect to the switch in the traditional way, using a computer and
a web browser. For more information, visit netgear.com/support/product/GC110 (or
GC110P) and search for “Configure the switch using a web browser”.
1. On your iOS or Android mobile device, go to the app store, search for
NETGEAR Insight, and download the app.
2. If the switch is directly connected to a WiFi router or access point (see
Step 3, Option 1, in Connect the Switch to Your Network), connect your
mobile device to the WiFi network of the router or access point.
3. Open the NETGEAR Insight app.
4. Select LOG IN to log in to your existing NETGEAR account or tap the
CREATE NETGEAR ACCOUNT button to create a new account.
Rear panel model GC110P
Option 2Option 1
Sample connections
Network Internet
Switch
Router or
gateway
PoE WiFi access points
PoE VoIP phone
Front panel models GC110 and GC110P
(Continued on the next page)

NETGEAR GC110P Specifications

General

Total Power over Ethernet (PoE) budget	62 W
Power over Ethernet (PoE) ports quantity	8
Switch type	Managed
Stackable	-
Product color	Gray
Rack mounting	No
LED indicators	Activity, Link, PoE, Power, Speed
Power connector	DC-in jack
Fiber optic connector	SFP
SFP module slots quantity	2
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Number of power supply units	1
MAC address table	- entries
Package depth	384 mm
Package width	80 mm
Package height	190 mm
Package weight	1700 g
Shipping (inner) case width	402 mm
Shipping (inner) case height	221 mm
Shipping (inner) case length	585 mm
Shipping (inner) case net weight	13010 g
Number of layers per pallet (air)	6 pc(s)
Number of layers per pallet (sea)	9 pc(s)
Number of cartons per pallet layer	4 pc(s)
Quantity per shipping (inner) case	7 pc(s)
Harmonized System (HS) code	85176990

Weight and Dimensions

Weight	770 g