EasyManua.ls Logo

NETGEAR GS205 User Manual

NETGEAR GS205
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Optional
modem
Step 1. Position switch
Step 3. Connect power
Step 4. Check status
Step 2. Connect equipment
GS208
5-Port and 8-Port Gigabit Switches GS205/GS208
Optional router
Internet
Computer Server
On
Off
Power LED
Activity (blinking)
No link (off)
Ethernet link
Port LEDs
Installation Guide
Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS205 and is the answer not in the manual?

NETGEAR GS205 Specifications

General IconGeneral
Jumbo frames9720
MAC address table4000 entries
Jumbo frames supportYes
Packet buffer memory0.128 MB
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10/100/1000 Mb/s
10G supportNo
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates10, 100, 1000 Mbit/s
Switch typeUnmanaged
Switch layer-
Power connectorDC-in jack
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity5
Power sourceDC
Input current1 A
DC input voltage12 V
Power consumption (typical)3.56 W
Number of power supply units1
CertificationCE, CB
Product colorWhite
LED indicatorsLAN, Power
Housing materialPlastic
Heat dissipation12.14 BTU/h
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)10 - 95 %
Operating relative humidity (H-H)0 - 90 %
Compatible operating systemsWindows 7
Package typeBox
Cables includedAC
Power supply12 W
Networking featuresGigabit Ethernet
Connectivity technologyWired
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth86 mm
Width114 mm
Height26 mm
Weight120 g

Summary

Switch Setup Guide

Position Switch

Guidance on positioning the network switch for optimal operation.

Connect Equipment

Connects the switch to computers, servers, routers, and modems for network setup.

Connect Power

Procedure for connecting the power adapter to the switch and a power source.

Check Status Indicators

Details the power and port LED indicators for monitoring the switch's status.

Product Specifications

Network Interface and Cable

Specifies RJ-45 connector type and recommended Ethernet cable category.

Port Configuration

Details the number of Gigabit Ethernet ports available on the switch models.

Power and Consumption

Information on the power adapter requirements and device power consumption.

Physical Attributes

Provides weight and physical dimensions for the switch units.

Environmental Operating Limits

Specifies acceptable temperature and humidity ranges for operation.

Certifications

Lists the regulatory and safety compliance marks for the product.

Technical Support and Registration

Product Registration

Instructions to register the product online for access to support and updates.

Support Resources

Guidance on using NETGEAR website and official resources for product support.

Related product manuals