Need help?Do you have a question about the NETGEAR GS324T and is the answer not in the manual?
General| Switch type | Managed |
|---|---|
| Switch layer | L2/L3/L4 |
| ARP inspection | Yes |
| Master (outer) case width | 270 mm |
| Master (outer) case height | 271 mm |
| Master (outer) case length | 481 mm |
| Master (outer) case weight | 8850 g |
| Harmonized System (HS) code | 85176990 |
| Quantity per master (outer) case | 3 pc(s) |
| Package type | Box |
| Package depth | 465 mm |
| Package width | 229 mm |
| Package height | 79 mm |
| Package weight | 2710 g |
| Cables included | AC |
| Stackable | - |
| Product color | Black |
| Input current | 5 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 13.5 W |
| Operating temperature (T-T) | 0 - 40 °C |
| MAC address table | 16000 entries |
| Power connector | AC-in jack |
| SFP module slots quantity | 2 |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Number of VLANs | 256 |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3az, IEEE 802.3x |
| Virtual LAN features | Private VLAN, Voice VLAN, Port-based VLAN |
| DHCP features | DHCP client |
Weight and Dimensions| Depth | 169 mm |
|---|---|
| Width | 328 mm |
| Height | 43 mm |
| Weight | 1620 g |
Instructions on how to connect to the switch's web interface using a browser.
Configure settings for individual ports, LAGs, or all ports and LAGs simultaneously.
Display switch status and specify basic information like IP address, clock, and DNS.
Configure network information for the local browser interface, including IP and VLAN settings.
View and configure physical port information, including speed, duplex, and frame size.
Add, delete, or modify virtual LAN (VLAN) settings and port membership.
Configure global and per-port 802.1X settings for network access control.
Create and apply ACLs to control network access based on IP or MAC addresses.
Download system files or update firmware using TFTP or HTTP.
To Next Page
