Do you have a question about the NETGEAR GS308PP and is the answer not in the manual?
Switch type | Unmanaged |
---|---|
Quality of Service (QoS) support | Yes |
Power connector | DC-in jack |
Installed SFP modules quantity | - |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Basic switching RJ-45 Ethernet ports quantity | 8 |
10G support | No |
Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x |
Jumbo frames | 9216 |
Latency (1 Gbps) | 3 µs |
MAC address table | 4000 entries |
Packet buffer memory | 0.192 MB |
Packet forwarding rate (1 Gbps) | 1448000 pps |
Certification | CE Mark, FCC Part 15 Class A, IC Class A, RCM, VCCI, BSMI, KC |
Product color | Black |
LED indicators | Activity, Link, PoE, Power, Speed |
Housing material | Metal |
Mean time between failures (MTBF) | 2752476 h |
Input current | 1.66 A |
DC input voltage | 54 V |
Power consumption (max) | 87.9 W |
Total Power over Ethernet (PoE) budget | 130 W |
Power over Ethernet (PoE) power per port | 30 W |
Power over Ethernet (PoE) type supported | PoE+ |
Heat dissipation | 300.6 BTU/h |
Operating altitude | 0 - 3000 m |
Storage temperature (T-T) | -20 - 70 °C |
Operating temperature (T-T) | 0 - 40 °C |
Operating relative humidity (H-H) | 0 - 90 % |
Harmonized System (HS) code | 85176990 |
Depth | 102 mm |
---|---|
Width | 236 mm |
Height | 27 mm |
Weight | 600 g |
Guide to registering the switch with the NETGEAR Insight app for device management.
Instructions and diagram for physically connecting the switch to network devices and the router.
Explains the meaning of LED indicators for PoE status and the PoE Max LED.
Details network cable types (Cat 5/5e) and their supported speeds (100 Mbps, 1 Gbps).
Instructions for mounting the switch to a wall using provided screws and anchors.
Guide on adjusting the switch's PoE budget using a slider based on power supply wattage.