Check the PoE status
Power LED Left Port LEDs Right PoE LEDs
On
1000 Mbps link
PoE in use
Off
100 or 10 Mbps link
PoE halted (see PoE
troubleshooting
)
Activity (blinking)
No PoE use (off)
No link (off)
The switch can supply up to 30W PoE+ (IEEE 802.3at) to each port, with a
maximum PoE power budget of total 83W with a 90W power adapter and total
123W with a 130W power adapter across all active PoE+ ports.
7KH3R(0D[/('LQGLFDWHVWKHVWDWXVRIWKH3R(EXGJHWRQWKHVZLWFK
Solid yellow/HVVWKDQ:RI3R(SRZHULVDYDLODEOHRQWKHVZLWFK
Blinking yellow7KH3R(0D[/('ZDVOLWVROLGLQWKHSUHYLRXVWZRPLQXWHV
6XIŴFLHQWPRUHWKDQ:RI3R(SRZHULVDYDLODEOHRQWKHVZLWFKWKH/('LVRII
Cables and speeds
The following table describes the network cables that you can use for the switch
connections and the speeds that thesse cables can support, up to 328 feet (100
meters).
Speed Cable Type
100 Mbps Category 5 (Cat 5) or higher
1 Gbps Category 5e (Cat 5e) or higher