NETGEAR GS308PP - Setup and Connectivity; Register with NETGEAR Insight; Connect the Switch

Register with the NETGEAR Insight app
1. Search for NETGEAR Insight and download the latest app.
2. Set up a NETGEAR account if you do not have one.
3. Tap the menu in the upper-left corner.
4. Tap REGISTER ANY NETGEAR DEVICE.
5. Enter the serial number located on the bottom of the switch, or use the
camera on your mobile device to scan the serial number bar code.
6. Tap GO.
The switch is registered and added to your account. You can now view the
switch in the NETGEAR Insight app.
Note: %HFDXVHWKLVLVDQXQPDQDJHGVZLWFK\RXFDQQRWFRQŴJXUHRUPDQDJHLW
in NETGEAR Insight.
Connect the switch
Sample connections
Router
Internet
PoE VoIP
phone
PoE+
security
camera
Smart
phone
/DSWRS
Wave 2
Wireless AP
GS308PP
ReadyNAS
Internet
PoE+
Ethernet