Need help?Do you have a question about the NETGEAR GS305EP and is the answer not in the manual?
General| Model | GS305EP |
|---|---|
| Category | Switch |
| PoE Ports | 4 |
| PoE Budget | 63W |
| Switching Capacity | 10 Gbps |
| Form Factor | Desktop |
| Management | Unmanaged |
| Forwarding Rate | 7.44 Mpps |
| MAC Address Table Size | 2K |
| Energy Efficient Ethernet (EEE) | Yes |
| Power Supply | External power adapter |
| Operating Temperature | 0° to 40° C (32° to 104° F) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 90% maximum relative humidity, non-condensing |
| Ports | 5 Gigabit Ethernet ports |
| Dimensions (W x D x H) | 158 x 101 x 29 mm (6.22 x 3.98 x 1.14 in) |
Lists all supported switch models for the manual.
Crucial safety guidelines to prevent damage and ensure personal safety.
Step-by-step guide to physically connect and power on the network switch.
Explains various ways to locate and connect to the switch's management interface.
Instructions for assigning a static IP address for consistent network access.
Guidance on updating the default password for enhanced security.
Configure QoS and rate limits to manage network traffic and prioritize data.
Customize individual port configurations like speed, flow control, and naming.
Explains the concept of Virtual LANs and their benefits for network segmentation.
Guides on enabling and configuring basic port-based VLANs for network isolation.
Details on creating, modifying, and deleting advanced port-based VLAN configurations.
Comprehensive management of advanced 802.1Q VLANs, including tagging and port PVIDs.
How to enable or disable the protocol for discovering the switch on the network.
Configure multiple ports to act as a single logical link for increased bandwidth or redundancy.
Procedures to set a static IP address for the switch or re-enable DHCP.
Procedure to check for and install the latest switch firmware.
Instructions for backing up and restoring switch configuration settings.
Explains how PoE power is allocated and prioritized by the switch.
How to enable, disable, or configure power delivery for individual PoE ports.
Utilizes a diagnostic feature to check network cable health and identify faults.
Tips for resolving common issues related to Power over Ethernet functionality.
Details the switch's configuration parameters after a factory reset.
Lists the hardware specifications for specific switch models.
Alternative method to discover and access the switch using IP scanner applications.
To Next Page
