NETGEAR GS324T - Download a File to the Switch or Update the Firmware

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Maintenance User Manual327
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Maintenance > Export > HTTP File Export.
The HTTP File Export page displays.
6. From the File T
ype menu, select the type of file:
•
Text Configuration. A text-based configuration file enables you to edit a configured
text file (
startup-config) offline as needed. The most common usage of
text-based configuration is to upload a working configuration from a device, edit it
offline to personalize it for another similar device (for example, change the device
name or IP address), and download it to that device.
• Tech Support.
The tech support file is a text-base file that contains a variety of
hardware, software, and configuration information that can assist in device and
network troubleshooting.
•
Crash Logs. The switch crash logs, if any are available.
7. Click the Apply
button.
The file transfer begins.
The page displays information about the file transfer progress. The page refreshes
automatically when the file transfer completes.
Download a File to the Switch or Update the
Firmware
You can download system files from a remote system to the switch by using either TFTP or
HTTP. In this context, downloading is also referred to as updating.
These procedures also include updating the switch firmware.
The following sections describe how you can download a file to the switch:
•
Use TFTP to Download a File to the Switch or Update the Software Image on page 328
• Use HTTP to Download a File to the Switch or Update the Software Image on page 330