S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Specifications and Default Settings User Manual362
Traffic Control Settings
The following table describes the traffic control settings.
Table 77. Traffic control settings
Feature Sets Supported Default
Storm control All ports Disabled
Jumbo frame All ports Default is 1500 bytes
Maximum is 9216 bytes
Quality of Service Settings
The following table describes the Quality of Service settings.
Table 78. Quality of Service settings
Feature Sets Supported Default
Number of queues • Models GS324T and GS324TP. 4 queues
• Model GS348T. 8 queues
N/A
802.1p 1 Enabled
DSCP 1 Disabled
Egress rate limiting All ports Disabled
Static 802.1Q tagging 256 VID = 1
The maximum number of member
ports are equal to the number of
ports on the switch
Learning process Supports static and dynamic MAC
entries
Dynamic learning is enabled by
default
Table 76. Port characteristics (continued)
Feature Sets Supported Default
To Next Page
Loading...
