Need help?Do you have a question about the NETGEAR GS724T and is the answer not in the manual?
General| MAC address table | 8000 entries |
|---|---|
| Jumbo frames support | Yes |
| Packet buffer memory | 0.5 MB |
| Maximum data transfer rate | 1 Gbit/s |
| Dimensions (WxDxH) | 43 x 440 x 260 mm |
| Connectivity technology | Wired |
| Non-operating relative humidity (non-condensing) | 0 - 95 % |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Mean time between failures (MTBF) | 59524 h |
| Power consumption (typical) | 40 W |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| SFP/SFP+ slots quantity | 2 |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| DHCP features | DHCP client |
| Switch type | Managed |
| Stackable | No |
Weight and Dimensions| Weight | 3200 g |
|---|
Configure Multiple Registration Protocol (MRP) settings for network streams.
Set global MRP parameters for the switch, including MMRP and MSRP.
Configure per-port MRP mode and timer settings for network interfaces.
View statistics related to MMRP frames transmitted and received.
Monitor MSRP frames transmitted and received on the switch.
View talker, listener, and intermediate device status for MSRP streams.
Configure per-port IEEE 802.1Qav settings for traffic pacing.
View detailed information about MSRP streams flowing through interfaces.
Enable 802.1AS mode and configure local clock priorities for time synchronization.
Configure per-port 802.1AS settings, including role and delay thresholds.
View statistics for 802.1AS messages transmitted and received per interface.
To Next Page