Do you have a question about the NETGEAR GS724T GS724T GS724T and is the answer not in the manual?
RJ-45 connectors | 24 for 10BASE-T, 100BASE-TX, and 1000BASE-T |
---|---|
SFP slots | 2 for fiber Gigabit Ethernet modules |
Bandwidth | 48 Gbps |
---|---|
Network latency | Less than 20 µs for 64-byte frames |
Buffer memory | 512 KB embedded memory per unit |
Address database size | 8, 000 MAC addresses per system |
Mean Time Between Failure (MTBF) | 59, 524 hours |
Power Consumption | 40 W maximum |
---|---|
Input Voltage | 100-240VAC/50-60 Hz universal input |
Operating temperature | 32 to 104°F (0 to 40°C) |
---|---|
Storage temperature | 14 to 158°F (-10 to 70°C) |
Operating humidity | 90% maximum relative humidity, non-condensing |
Storage humidity | 95% maximum relative humidity, non-condensing |
Operating altitude | 10, 000 ft (3, 000 m) maximum |
Storage altitude | 10, 000 ft (3, 000 m) maximum |
Dimensions | 1.7 x 17.3 x 10.25 in. (43 x 440 x 260 mm) |
---|---|
Weight | 7.1 lbs. (3.2 kg) |
Offers simple switch management with 24 10/100/1000 Mbps ports, optional fiber, and web-browser interface for monitoring and configuration.
Features 24 non-blocking 10/100/1000 ports with 48 Gbps bandwidth and two SFP GBIC fiber slots for expanded reach.
Provides performance monitoring, port configuration, VLAN, port trunking, and Class of Service (CoS) for traffic prioritization.
Offers management benefits without the complexity of full SNMP for businesses requiring essential network control.
Features simple setup, effortless monitoring, and a sturdy 17-inch metal box with a rack mounting kit for durability.
Compliant with IEEE 802.3, 802.3u, 802.3ab Ethernet standards and 802.3x flow control.
Equipped with 24 RJ-45 connectors for 10/100/1000 Mbps and 2 SFP slots for optional fiber Gigabit Ethernet modules.
Supports Tag VLAN, port-based VLAN, QoS, port trunking, DHCP, web configuration, and discovery utility.
Implements half-duplex back-pressure and full-duplex IEEE 802.3x pause frame flow control.
Details store-and-forward mode, 48 Gbps bandwidth, low latency, 512 KB buffer memory, and 8000 MAC address database.
Includes per-port status LEDs and a universal 40W power supply supporting 100-240VAC input.
Measures 1.7 x 17.3 x 10.25 inches and weighs 7.1 lbs (3.2 kg), including a rack-mount kit.
Specifies operating temperature (0-40°C), humidity (90% max), and altitude (10,000 ft max).
Meets CE, FCC Part 15 Class A, VCCI Class A, EN 55022, EN 50082-1, EN 55024, C-Tick, and UL/cUL/IEC950 safety standards.
Provides a 5-year warranty for the switch and a 2-year warranty for the power supply.
Requires category 5 network cables, a network card for each PC, and network software (e.g., Windows).
Includes the GS724T switch, rubber footpads, power cord, rack-mount kit, Resource CD, installation guide, and warranty card.
Lists optional SFP GBIC modules: AGM731F (multi-mode) and AGM732F (single-mode) for extended fiber connectivity.