EasyManuals Logo
Home>NETGEAR>Switch>GS724T

NETGEAR GS724T User Manual

NETGEAR GS724T
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Ethernet Audio Video
15
GS716T and GS724T Gigabit Smart Switches
Class A Delta bandwidth is the additional bandwidth represented as a percentage of port
transmit rate which can be reserved for the traffic class A and traffic class B. Class A
traffic has a higher priority. The range is 0–100.
The following Class A fields are read-only:
The Bandwidth Allocated field shows the current rate of the class A traffic on interface
(in Bps).
The Class A Remaining Bandwidth field shows the maximum rate of the class A traffic
available on interface (in Bps).
3. Configure the Class B MSRP delta bandwidth.
Class B Delta bandwidth is the additional bandwidth represented as a percentage of port
transmit rate which can be reserved for the traffic class B. The range is 0–100.
The following Class A fields are read-only:
The Bandwidth Allocated field shows the current rate of the class A traffic on interface
(in Bps).
The Class A Remaining Bandwidth field shows the maximum rate of the class A traffic
available on interface (in Bps).
4. View the following information about the total bandwidth:
The Total Bandwidth Allocated Sum of the allocated Class A and Class B traffic rates
on interface (in Bps).
Total Remaining Bandwidth, which is 75% of the interface speed minus total allocated
bandwidth (in Bps/sec).
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6. If you make any changes to the page, click Apply to apply the change to the system.
7. Click Refresh to reload the page and update it with the most current information.
MSRP Streams Information
Use the MSRP Stream Information page to view information about MSRP streams flowing
through each interface. To display the MSRP Stream Information page click the Switching
tab, then click MRP > Advanced > MSRP Stream Information.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS724T and is the answer not in the manual?

NETGEAR GS724T Specifications

General IconGeneral
MAC address table8000 entries
Jumbo frames supportYes
Packet buffer memory0.5 MB
Maximum data transfer rate1 Gbit/s
Dimensions (WxDxH)43 x 440 x 260 mm
Connectivity technologyWired
Non-operating relative humidity (non-condensing)0 - 95 %
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Mean time between failures (MTBF)59524 h
Power consumption (typical)40 W
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 90 %
SFP/SFP+ slots quantity2
Basic switching RJ-45 Ethernet ports quantity24
DHCP featuresDHCP client
Switch typeManaged
StackableNo
Weight and Dimensions IconWeight and Dimensions
Weight3200 g

Related product manuals