NETGEAR GS908E Installation

Installation
Connect the Switch to Your Network
1. Connect a LAN port on the switch to a LAN port on a router that is
connected to the Internet.
2. Connect your devices to the other LAN ports on the switch.
To set up the switch from a mobile device, you must connect a WiFi router
or WiFi access point to a LAN port on the switch.
3. Connect the power adapter to the switch and plug the power adapter into
an electrical outlet.
ON/STANDBY
OPEN?CLOSE PLAY STOP
P-SCAN
POWER
DVD PLAYER
PROGRESSIVE SCAN
The blue Power LED on the front of the switch lights and the port LEDs
for connected devices light. The switch receives an IP address from
a DHCP server (or router that functions as a DHCP server) in your
network.
Note: If your network does not include a DHCP server, the switch uses
192.168.0.239 as its default IP address. For more information about
such a configuration, see the GS908E switch user manual.
Access the Switch
Access the Switch From a Windows-Based Computer
1. Open Windows Explorer.
2. Click the Network link.
3. If prompted, enable the Network Discovery feature.
4. Under Network Infrastructure, locate the GS908E switch.
5. Double-click GS908E (xx:xx:xx:xx:xx:xx) (where
xx:xx:xx:xx:xx:xx is the MAC address of the switch).
The login page of the local browser-based management interface
opens.
6. Enter the switch password. The default password is password.
The Home page displays the IP address of the switch.
8-Port Gigabit Ethernet Smart Managed
Plus Switch with Integrated Cable Management
Model GS908E
GS908E switchRouter
Sample connections
Internet
Uplink
Package Contents
• Switch model GS908E
• AC power adapter (localized to country of sale)
• Wall-mount screws and anchors
• Cable retention strap
• Installation guide

NETGEAR GS908E Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Safety	IEC 60950-1:2005(ed.2) + A1:2009 + A2:2013, UL 60950-1, CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015
Stackable	-
Certification	47 CFR FCC Part 15, ICES-003:2016, ANSI C63.4:2014, EN 55022:2010 + AC:2011, EN 55024:2010, EN 61000-3-2:2014, EN 6100-3-3:2013, AS/NZS CISPR 22:2009 + A1:2010, VCCI V-3/2015.04, V-4/2012.4
Product color	Black, White
Rack mounting	No
Number of multicast groups filtered	128
USB 2.0 ports quantity	2
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	26.3 W
Power consumption (typical)	3.3 W
Number of VLANs	64
Networking standards	IEEE 802.1Q, IEEE 802.1p
Virtual LAN features	Port-based VLAN
DHCP features	DHCP client
Jumbo frames	9000
Forwarding rate	11.9 Mpps
Number of queues	4
MAC address table	4000 entries
Heat dissipation	89.8 BTU/h
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	164 mm
Width	234 mm
Height	33 mm
Weight	370 g