NETGEAR GS908 User Manual

Installation
Connect the Switch to
Your Network
1. Connect a LAN port on the switch to a
LAN port on a router that is connected to
the Internet.
2. Connect your devices to the other LAN
ports on the switch.
3. Connect the power adapter to the switch
and plug the power adapter into an
electrical outlet.
4. Turn on the switch by moving the
OFF/ON slider next to the DC input
connector to the ON position.
The blue Power LED on the front of the
switch lights.
8-Port Gigabit Ethernet Unmanaged
Switch with Integrated Cable Management
Model GS908
ON/STANDBY
OPEN?CLOSE PLAY STOP
P-SCAN
POWER
DVD PLAYER
PROGRESSIVE SCAN
GS908 switch
Router
Sample connections
Internet
The port LEDs light as follows:
• O. No link.
• Solid green. 1 Gbps link
• Solid yellow. 100 or 10 Mbps link
• Blinking green. 1 Gbps trac
• Blinking yellow. 100 or 10 Mbps trac
Note: To turn o all LEDs, press the LED On/O button.
Package contents
Uplink
OFF/ON sliderLED On/O

NETGEAR GS908 Specifications

General

Switch type	Unmanaged
Safety	IEC 60950-1:2005(ed.2) + A1:2009 + A2:2013, UL 60950-1, CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015
Stackable	-
Certification	47 CFR FCC Part 15, ICES-003:2016, ANSI C63.4:2014, EN 55022:2010 + AC:2011, EN 55024:2010, EN 61000-3-2:2014, EN 6100-3-3:2013, AS/NZS CISPR 22:2009 + A1:2010, VCCI V-3/2015.04, V-4/2012.4
Product color	Black, White
Rack mounting	No
LED indicators	Yes
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	3.1 W
Power consumption (typical)	1.5 W
Networking standards	IEEE 802.1p
MAC address table	4000 entries
Heat dissipation	10.4 BTU/h
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Depth	164 mm
Width	234 mm
Height	33 mm
Weight	370 g

Summary

Connect the Switch to Your Network

Connection and Power-Up Procedure

Steps for physically connecting the switch to the network and powering it on.

Port LED Status Indicators

Explanation of the different states and colors of the switch's port LEDs.

Wall-Mount the Switch

Wall Mounting Instructions

Detailed steps for securely mounting the switch to a wall using screws and anchors.

Product Support and Resources