Need help?Do you have a question about the NETGEAR GS748TS-100NAS and is the answer not in the manual?
General| Model | GS748TS |
|---|---|
| Power over Ethernet (PoE) | No |
| Form Factor | Rack-mountable |
| Switching Capacity | 104 Gbps |
| Forwarding Rate | 77.4 Mpps |
| VLAN Support | Yes |
| Quality of Service (QoS) | Yes |
| Device Type | Switch |
| Ports | 48 x 10/100/1000 Mbps Gigabit Ethernet |
| Uplink Ports | 4 x SFP |
| Jumbo Frame Support | Yes, up to 9216 bytes |
| Management | Web-based, SNMP |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Operating Humidity | 90% maximum (non-condensing) |
| Power Supply | Internal, 100-240V AC |
| Layer | Layer 2/Layer 3 |
Overview of the switch's management interface methods.
Steps for setting up the switch with or without DHCP, including manual assignment.
Configuring the host PC's NIC and accessing the switch via web.
Accessing and navigating the switch's web interface.
Overview of the configuration utility and its main sections.
Configuring port attributes and viewing traffic statistics.
Managing network traffic priority using QoS.
To Next Page