GS748T Software User Manual
Getting Started—Smart Wizard Discovery 2-5
v2.0, April 2007
Web Access
Clicking on the Web Access button of the Smart Wizard Discovery utility reveals the page shown
in below.
Use this page to proceed to management of the switch covered in Chapter 3, “Basic Web
Management”.
Additional Utilities
Alternatively, from the main page of Figure 2-1 you can access the additional functions:
• Password Change
• Firmware Upgrade
Password Change
You can set a new password of up to 20 ASCII characters.
1. Click ‘Password Change’ from the Switch Setting section. The Password Change screen.
appears. You can set a new password. In this process, you are required to enter the old
password and to confirm the new one.
2. Click ‘Set’ to enable the new password.
Figure 2-5
To Next Page
Loading...
