NETGEAR GSS108E-100EUS

Manage the Switch
58
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
The switch’s default password is password.
Note: To navigate to this page, select System > Management > Switch
Information.
Use the ProSAFE Plus Utility to View Switch Information
 To view information about a switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPL
Y button.
You are asked to enter the password for the switch.
5. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Status page displays.