NETGEAR HA311 User Manual

6
Package Contents
This product package should contain:
♦
One HA311 802.11a Wireless PCI Adapter
with an integral antenna
♦
One HA311 Wireless PCI Adapter
Resource CD-ROM
♦
One HA311 User’s Guide (this manual)
♦
One Support Information Card
♦
One Warranty and registration card
Please call your reseller or customer support in your area if there are any wrong,
missing, or damaged parts. You can refer to the Support Information Card for
the telephone number of customer support in your area. You should keep the
Support Information Card, along with the original packing materials, and use the
packing materials to repack the HA311 Wireless PCI Adapter if you need to
return it for repair.
To qualify for product updates, product support, and product warranty
registrations, register online on the NETGEAR Web page at:
http://www.NETGEAR.com.
System Requirements
Before installing the HA311 Wireless PCI Adapter, please make sure that these
minimum requirements have been met:
♦
You must have a Pentium III Class PC with an available PCI 2.2 compliant
slot.
♦
5 Mbytes of free hard drive space.

NETGEAR HA311 Specifications

General

Radio Data Rate	6, 9, 12, 18, 24, 36, 48, 54, 72 for Turbo mode (Auto rate capable)
Encryption	40-bit (also called 64-bit), 128-bit or 152-bit WEP data encryption
Frequency	5.15 ~ 5.25 GHz (lower band) for US/Canada, Japan 5.25 ~ 5.35 GHz (middle band) for US/Canada
Operating Range:	Outdoor environment Indoor environment @ 6 Mbps 1200 ft. 300 ft. @ 54 Mbps 100 ft. 60 ft.
Environmental Specifications	Operating temperature: 0 to 60° C Operating humidity: 5-95%, non-condensing
Bus interface	32-bit PCI
Provided drivers	Microsoft Windows 98SE, NT 4.0, 2000, Millennium, XP
Status LEDs	Power and Network
Electromagnetic Compliance	FCC Part 15 Class B and Class E
Warranty	Limited 3-year warranty

Weight and Dimensions

Dimensions	L: 174.3 mm (6.9 in) W: 133.7 mm (5.3 in) H: 21.6 mm (0.85 in)
Weight	102 g (3.8 oz)