54Mbps Wireless Router Model KWGR614 Reference Manual
Wireless Configuration 2-13
v1.2, September 2006
• Automatic—enter a word or group of printable characters in the Passphrase box and click
the Generate button. The passphrase is case sensitive; NETGEAR is not the same as
nETgear. The four key boxes are automatically populated with key values.
• Manual—enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F). These entries
are not case sensitive; AA is the same as aa.
Select which of the four keys to activate.
Please see “Wireless Communications” in Appendix B for a full explanation of each of these
options, as defined by the IEEE 802.11 wireless communication standard.
6. Click Apply to save your settings.
How to Configure WPA-PSK or WPA2-PSK Wireless Security
To configure WPA-PSK, follow these steps:
Note: Not all wireless adapters support WPA. Furthermore, client software is also
required. Windows XP and Windows 2000 with Service Pack 3 do include WPA
support. Nevertheless, the wireless adapter hardware and driver must also support
WPA. For instructions on configuring wireless computers or PDAs (Personal
Digital Assistants) for WPA-PSK security, consult the documentation for the
product you are using.
To Next Page
Loading...
